Industrial Acetoxy Silicone Sealant Outstanding Weatherproof Good
1. Single-component, neutral curing, high strength, high
cohesiveness, high modulus, excellent performance in resist
2. Excellent unprimed adhesion to most common building substrates.
Good extensibility, water tightness. Super weatherproof, age
resistant, heat and cold resistant, ultraviolet and ozone
resistant, non-corrosiveness, pollution-free after solidified.
3. Excellent capability with other silicone sealant produced by our
( OEM IS Available)
Scope Of Application:
1. Various interior decoration glass, aluminum alloy and glass
2. Various glazing projects
3. Seal & cementation of al-alloy door & window,
storefront, show window, diagonal and skylight corner line
4. Good sealing performance for glass, glass fiber, pottery &
porcelain and greaseless material
Clean the base material with cloth: clean it with solvent; if in
particular demand, coat the surface with paint base and let it dry
Make sure fill the interface with it and tightly stick to the base
Deal with adhesion test before the use and make sure good
compatibility and viscosity of products and base material
Advantage: Fast dry, Easy operation , Excellent adhesion property,
Glass joint :
Restriction of Usage:
Cannot be used as structural sealant;
Not compatible with the materials of grease or exudation;
Unsuitable for airproof location, for it requires absorbing
moisture in air to cure;
Unsuitable for frosty or moist surface;
Unsuitable for continually flooding or entire-year moist place;
Corrosive to the materials of concrete, porosint stone, zinc and
Cannot be used when the substrate temperature is under 6℃or above
Main Technology Data: Standard: GB/T14683-2003
Max. Tensile strength
Elongation at Break(%)
-20 to +40
-50 to +100
Under water adhesive
Elastic Recovery Ratio
Skin drying time and fully drying time under: 23 and 50% humidity
Restriction of Usage:
1, Unsuitable used on the material's surface that leaking grease,
plasticizer or solvent.
2, It should be used in the ventilated places, because the silicone
sealant need to absorb the moisture
in the air for drying.
3, Unsuitable used for frost or wet surface.
4, Unsuitable used for metal coated glass assembly
5, Unsuitable used for marble, granite and other alkaline
substances joints sealing.
6, Unsuitable for construction on the material's surface that the
temperature lower 6℃ or higher than 40℃.
Please do adhesion test or compatibility test to assure the
applicability of product;
Please clean the joint with solvent such as toluene, xylene and
acetone, then keep it dry;
Tape is used to cover the edge of the joint to make silicone
sealant sealed perfectly, but it cannot contact the sealed surface;
Cut the nozzle at the desired size. Keep good contact between the
silicone sealant and joint, and remove the tape before the sealant
is cured; Please keep ventilate for the construction site.
Silicone sealant will release volatile compound so that it could be
harmful to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and not be
harmful to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting
into eyes, wash off with running water and consult a doctor;
As an ISO9001-2015, ISO14001 certified company, we are committed to
establish and implement the ISO9001 Quality Management System. We
will sign the Quality Guarantee with customers after they buy our
products and confirm the construction organization and engineering.
Note: The actual usage amount maybe different due to the joint design,
installation position of pad material, repairing skill and wastage
Information published in this instruction is correct. However, but
no means can it be considered
and absolute guarantee, as usage and application of the product in
accordance with the instruction given
and success in application is beyond our control and is depend on
many factors. Customers should have
a good knowledge of product and make independent judgments of
optimal usage before application.