One - component, acid, acetic acid type room temperature curing
silicone rubber glass; Fast curing speed, good adhesion, extrusion
is good, easy to use, has excellent weatherability weather aging;
For glass, aluminum alloy, plastic steel windows and doors,
ceramic, non assembly oily Wood etc.;
Powder coated aluminum must be solvent completely remove wax
Must use solvents such as toluene or acetone, keep the interface
clean and dry. As to the use of a primer to enhance its adhesion,
when the primer is dry before construction. Construction
application of sealant joints completely filled, ensure a double
faced adhesive. Taped the protection of sites in need, but make
sure the tape not to touch the surface of construction will be.
Before the gum is solidified, trimming immediately, in order to
achieve the beautiful appearance.
Glass joint :
Restriction of Usage:
Cannot be used as structural sealant;
Not compatible with the materials of grease or exudation;
Unsuitable for airproof location, for it requires absorbing
moisture in air to cure;
Unsuitable for frosty or moist surface;
Unsuitable for continually flooding or entire-year moist place;
Corrosive to the materials of concrete, porosint stone, zinc and
Cannot be used when the substrate temperature is under 6℃or above
Main Technology Data: Standard: GB/T14683-2003
Max. Tensile strength
Elongation at Break(%)
-20 to +40
-50 to +100
Under water adhesive
Elastic Recovery Ratio
Skin drying time and fully drying time under: 23 and 50% humidity
Restriction of Usage:
1, Unsuitable used on the material's surface that leaking grease,
plasticizer or solvent.
2, It should be used in the ventilated places, because the silicone
sealant need to absorb the moisture
in the air for drying.
3, Unsuitable used for frost or wet surface.
4, Unsuitable used for metal coated glass assembly
5, Unsuitable used for marble, granite and other alkaline
substances joints sealing.
6, Unsuitable for construction on the material's surface that the
temperature lower 6℃ or higher than 40℃.
Please do adhesion test or compatibility test to assure the
applicability of product;
Please clean the joint with solvent such as toluene, xylene and
acetone, then keep it dry;
Tape is used to cover the edge of the joint to make silicone
sealant sealed perfectly, but it cannot contact the sealed surface;
Cut the nozzle at the desired size. Keep good contact between the
silicone sealant and joint, and remove the tape before the sealant
is cured; Please keep ventilate for the construction site.
Silicone sealant will release volatile compound so that it could be
harmful to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and not be
harmful to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting
into eyes, wash off with running water and consult a doctor;
As an ISO9001-2015, ISO14001 certified company, we are committed to
establish and implement the ISO9001 Quality Management System. We
will sign the Quality Guarantee with customers after they buy our
products and confirm the construction organization and engineering.