High Temperature Resistance Silicone Building Sealant Non -
Pollution Curtain Wall
Products formed after curing cold resistant, heat resistant, no
corrosion of the elastomer, excellent weather resistance.
For all kinds of marble, granite, cement material excellent
cohesiveness, hot and cold resistance. Products formed after curing
cold resistant, heat resistant, no corrosion of the elastomer,
excellent weather resistance, anti-aging, resistance to ultraviolet
radiation, ozone and high and low temperature resistance, no
pollution to the environment.
1, high quality, high-level building silicone glue, structural
assembly specifically designed for weather resistance packing.
2, one-component, may at any time used in silicone rubber formula
has reached international standards.
3, are widely used in glass curtain wall, stone curtain wall,
aluminum curtain wall engineering, etc.
4, excellent weathering resistance, performance within the range -
50 ℃ to 100 ℃ changed little, uv resistant, resistant to ozone.
1, Must use solvents such as toluene or acetone, keep the interface
clean and dry.
2, As to the use of a primer to enhance its adhesion, when the
primer is dry before construction. 3, Construction application of
sealant joints completely filled, ensure a double faced adhesive.
Taped the protection of sites in need, but make sure the tape not
to touch the surface of construction will be.
3, Before the gum is solidified, trimming immediately, in order to
achieve the beautiful appearance.
When the surface of the material at the temperature above 40℃ ,
can't be constructed using the sealant; cannot be used as
structural adhesive; not in the wet surface construction; cannot be
used for oil or oil leakage surface; cannot be used directly in the
new cement concrete surface.
Sag degree, mm
extrudability, ml / min.
tack-free time, min
recovery of elastic, %
specific gravity, g/ml
Depth of curing, mm
Adhesion properties , %
tensile modulus(MAX), Mpa
elongation at break, %
105℃ volatile content, %
The housetop joint photos
Silicone sealant will release volatile compound so that it could be
harmful to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and not be
harmful to health after cured; Keep uncured silicone sealant beyond
children’s reach. If getting into eyes, wash off with running water
and consult a doctor;
As an ISO9001-2015, ISO14001 certified company, we are committed to
establish and implement the ISO9001 Quality Management System. We
will sign the Quality Guarantee with customers after they buy our
products and confirm the construction organization and engineering.
Generally there is no need to repair. If the seal joint is damaged,
please remove the damaged silicone sealant, clean the surface of
substrates, and fill up with silicone sealant.
KAYA silicone sealants have good adhesion to cured sealant.
Factory Size (Sq.meters): 10,000-30,000 square meters
Factory Location:No.3 of 2 Road, Industrial Section 2,,fengjian
Industrial area,Xingtan, Shunde,Foshan,Guandong,China
No. of Production Lines: 10
Number of R&D Staff: 5 - 10 People
Number of QC Staff: 5 - 10 People
Certifications: ISO9001-2015, ISO14001
Contract Manufacturing: OEM Service Offered Design Service Offered
Buyer Label Offered