Middle Grade Fast Cure Glass Silicone Sealant Sealing Thixotropy
One component, RTV-1, acetic curing;Excellent weatherproofing
performance;Good adhesion to various building materials.
Widely used for sealing glass assembly, aquarium, aluminum-plastic
plate curtain wall, roof skylight daylighting, cabinets, display
cabinets adhesive sealing and many construction of industrial use.
Restriction of Usage:
Cannot be used as structural sealant;
Not compatible with the materials of grease or exudation;
Unsuitable for airproof location, for it requires absorbing
moisture in air to cure;
Unsuitable for frosty or moist surface;
Unsuitable for continually flooding or entire-year moist place;
Corrosive to the materials of concrete, porosint stone, zinc and
Cannot be used when the substrate temperature is under 6℃or above
For Use with : Standard Caulk Gun , Application : For glass,
aluminum alloy, plastic steel windows and doors, ceramic, non
assembly oily Wood etc, Windows , Doors, mirror, Vents Applications
and multi-purpose ; Storage : 9 months shelf life if stored below
27℃ in cool and dry place after production.
Please do adhesion test or compatibility test to assure the
applicability of product;
Please clean the joint with solvent such as toluene, xylene and
acetone, then keep it dry;
Tape is used to cover the edge of the joint to make silicone
sealant sealed perfectly, but it cannot contact the sealed surface;
Cut the nozzle at the desired size. Keep good contact between the
silicone sealant and joint, and remove the tape before the sealant
is cured; Please keep ventilate for the construction site.
When the surface of the material at the temperature above 40℃ ,
can't be constructed using the sealant; cannot be used as
structural adhesive; not in the wet surface construction; cannot be
used for oil or oil leakage surface; cannot be used directly in the
new cement concrete surface.
Window and door accessory use:
As Supplied Tested at 23°C and 50% RH
Flow (sag or slump)
Curing time (5mm)
As Cured-after 21 days at 23°C and 50% RH
Durometer Hardness, Shore A
Tensile/Modulus at 50% Elongation
Tensile/Modulus at 100% Elongation
Ultimate Tensile Strength
Ultimate Elongation at Break
As an ISO9001-2015, ISO14001 certified company, we are committed to
establish and implement the ISO9001 Quality Management System. We
will sign the Quality Guarantee with customers after they buy our
products and confirm the construction organization and engineering.