Glass Sealing Heat Proof Silicone Sealant , Bonding Acetoxy
1, One-component, acid drying at neutral room temperature,
excellent construction silicone sealant;
2, Transparent, invariant color, fast dry, especially suitable for
glass bonding and sealing.
3, Excellent weather resistant, service life near 30 years under
normal climate conditions.
For glass, aluminum alloy, plastic steel windows and doors,
ceramic, non assembly oily Wood etc.;
Powder coated aluminum must be solvent completely remove wax
Must use solvents such as toluene or acetone, keep the interface
clean and dry. As to the use of a primer to enhance its adhesion,
when the primer is dry before construction. Construction
application of sealant joints completely filled, ensure a double
faced adhesive. Taped the protection of sites in need, but make
sure the tape not to touch the surface of construction will be.
Before the gum is solidified, trimming immediately, in order to
achieve the beautiful appearance.
Glass joint :
When the surface of the material at the temperature above 40 Degree
,can't be constructed using the sealant; cannot be used as
structural adhesive; not in the wet surface construction; cannot be
used for oil or oil leakage surface; cannot be used directly in the
new cement concrete surface.
Main Technology Data: Standard: GB/T14683-2003
Max. Tensile strength
Elongation at Break(%)
-20 to +40
-50 to +100
Under water adhesive
Elastic Recovery Ratio
Skin drying time and fully drying time under: 23 and 50% humidity
Please do adhesion test or compatibility test to assure the
applicability of product;
Please clean the joint with solvent such as toluene, xylene and
acetone, then keep it dry;
Tape is used to cover the edge of the joint to make silicone
sealant sealed perfectly, but it cannot contact the sealed surface;
Cut the nozzle at the desired size. Keep good contact between the
silicone sealant and joint, and remove the tape before the sealant
is cured; Please keep ventilate for the construction site.
Silicone sealant will release volatile compound so that it could be
harmful to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and not be
harmful to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting
into eyes, wash off with running water and consult a doctor;
As an ISO9001-2015, ISO14001 certified company, we are committed to
establish and implement the ISO9001 Quality Management System. We
will sign the Quality Guarantee with customers after they buy our
products and confirm the construction organization and engineering.