Everbuild Bath Silicone Sealant , Neutral Cure Window Silicone
1, One - component, acetic acid Silicone, Size: 300ml / 260ml /
250ml / 220ml / 280ml ,
2, Container Type: Tube , Color: Generally colours is porcelain
white , black, silver grey , transparent and semi- transparency .
3, Density 0.56(g/cm3) , Performance Temperature: Range: lower 6℃
or higher than 40℃ ;
4, Substrates: aluminum alloy, plastic door , all kinds of glass ,
pottery , porcelain engineering adhesive sealing.
5, Full Cure: 24 hours. Application Time: 30 minutes. Application
Temperature Range: Neutral room temperature ;
6, Characteristics : Will not shrink or crack , good adhesion,
extrusion is good, easy to use, has excellent weatherability;
7,Anti-aging; 30 minutes Tack free time, For Use with : Standard
Caulk Gun ;
8, Application : For glass, aluminum alloy, plastic steel windows
and doors, ceramic, non assembly oily Wood etc, Windows , Doors,
mirror, Vents Applications and multi-purpose ;
9, Storage : 9 months shelf life if stored below 27℃ in cool and
dry place after production.
1,Must use solvents such as toluene or acetone, keep the interface
clean and dry.
2,As to the use of a primer to enhance its adhesion, when the
primer is dry before construction. 3,Construction application of
sealant joints completely filled, ensure a double faced adhesive.
4,Taped the protection of sites in need, but make sure the tape not
to touch the surface of construction will be.
5,Before the gum is solidified, trimming immediately, in order to
achieve the beautiful appearance.
When the surface of the material at the temperature above 40℃ ,
can't be constructed using the sealant; cannot be used as
structural adhesive; not in the wet surface construction; cannot be
used for oil or oil leakage surface; cannot be used directly in the
new cement concrete surface.
Bathroom accessory use:
As Supplied Tested at 23°C and 50% RH
Flow (sag or slump)
Curing time (5mm)
As Cured-after 21 days at 23°C and 50% RH
Durometer Hardness, Shore A
Tensile/Modulus at 50% Elongation
Tensile/Modulus at 100% Elongation
Ultimate Tensile Strength
Ultimate Elongation at Break
Silicone sealant will release volatile compound so that it could be
harmful to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and not be
harmful to health after cured; Keep uncured silicone sealant beyond
children’s reach. If getting into eyes, wash off with running water
and consult a doctor;
As an ISO9001-2015, ISO14001 certified company, we are committed to
establish and implement the ISO9001 Quality Management System. We
will sign the Quality Guarantee with customers after they buy our
products and confirm the construction organization and engineering.
Generally there is no need to repair. If the seal joint is damaged,
please remove the damaged silicone sealant, clean the surface of
substrates, and fill up with silicone sealant.
KAYA silicone sealants have good adhesion to cured sealant.