Rubber / Stone Silicone Sealant Weather Resistance For Glass Joint
1, Single component, neutral curing, high modulus, fast curign
2, Good adhesive capacity on many base material, having excellent
weatherability and resistance.
3, Can be applied in any season and easy to apply.
4, High bonding strength, non-corrosive, have a strong seal with
the majority of
1. For installation and sealing of various windows and doors.
2. For gap filling and bonding of architectural decoration, glass,
brick, ceramic, etc.
3. Most of the materials sealing, and other multi-purpose assembly.
Colors white, black ,grey, transparent, and any requested colors .
1, Must use solvents such as toluene or acetone, keep the interface
clean and dry.
2, As to the use of a primer to enhance its adhesion, when the
primer is dry before construction. 3, Construction application of
sealant joints completely filled, ensure a double faced adhesive.
Taped the protection of sites in need, but make sure the tape not
to touch the surface of construction will be.
3, Before the gum is solidified, trimming immediately, in order to
achieve the beautiful appearance.
When the surface of the material at the temperature above 40℃ ,
can't be constructed using the sealant; cannot be used as
structural adhesive; not in the wet surface construction; cannot be
used for oil or oil leakage surface; cannot be used directly in the
new cement concrete surface.
Skin form time
Curing Rate (2mm/h)
Max. Tensile strength
Hardness shore A
Elongation at Break (%)
Modulus Mpa (100%)
-20°C to 40°C
-50°C to 100°C
Under water adhesive
Skin drying time and fully drying time under: 23°C and 50% humidity
Silicone sealant will release volatile compound so that it could be
harmful to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and not be
harmful to health after cured; Keep uncured silicone sealant beyond
children’s reach. If getting into eyes, wash off with running water
and consult a doctor;
As an ISO9001-2015, ISO14001 certified company, we are committed to
establish and implement the ISO9001 Quality Management System. We
will sign the Quality Guarantee with customers after they buy our
products and confirm the construction organization and engineering.
Generally there is no need to repair. If the seal joint is damaged,
please remove the damaged silicone sealant, clean the surface of
substrates, and fill up with silicone sealant.
KAYA silicone sealants have good adhesion to cured sealant.