Construction Latasil Tile And Stone Sealant For Concrete Joint
1, One-component, drying at neutral room temperature, excellent
construction silicone sealant;
2, Does not contain plasticizing agent the small inert molecular
components in the formulation. No pollution for marble, granite and
other porous materials; the sealing and decorative effect is better
than general silicone sealant. Make up for the shortcomings of the
pollution from ordinary silicone sealant.
3, Good adhesion to all kinds of marble, granite, cement board
material, will not change for the invasion of wind, snow and rain,
effectively guarantee the adhesive sealing effect.
4, Excellent weather resistant, Good anti ultraviolet ability;
5, Good compatibility with other neutral silicone sealant.
1, Use for dry hanging stone curtain wall engineering and precast
cement engineering joint sealing.
2, Use for the bonding and sealing of ceramics engineering.
3, Use for stone and other materials such as glass, metal, plastic
1, Must use solvents such as toluene or acetone, keep the interface
clean and dry.
2, As to the use of a primer to enhance its adhesion, when the
primer is dry before construction. 3, Construction application of
sealant joints completely filled, ensure a double faced adhesive.
Taped the protection of sites in need, but make sure the tape not
to touch the surface of construction will be.
3, Before the gum is solidified, trimming immediately, in order to
achieve the beautiful appearance.
When the surface of the material at the temperature above 40℃ ,
can't be constructed using the sealant; cannot be used as
structural adhesive; not in the wet surface construction; cannot be
used for oil or oil leakage surface; cannot be used directly in the
new cement concrete surface.
Skin form time
Curing Rate (2mm/h)
Max. Tensile strength
Hardness shore A
Elongation at Break (%)
Modulus Mpa (100%)
-20°C to 40°C
-50°C to 100°C
Under water adhesive
Skin drying time and fully drying time under: 23°C and 50% humidity
Silicone sealant will release volatile compound so that it could be
harmful to health, therefore, please keep good and ventilate;
Silicone sealant will not release any harmful substance and not be
harmful to health after cured; Keep uncured silicone sealant beyond
children’s reach. If getting into eyes, wash off with running water
and consult a doctor;
As an ISO9001-2015, ISO14001 certified company, we are committed to
establish and implement the ISO9001 Quality Management System. We
will sign the Quality Guarantee with customers after they buy our
products and confirm the construction organization and engineering.
Generally there is no need to repair. If the seal joint is damaged,
please remove the damaged silicone sealant, clean the surface of
substrates, and fill up with silicone sealant.
KAYA silicone sealants have good adhesion to cured sealant.