Anti - Cold All - Glass Silicone Aquarium Sealant Heat Proof
Good cohesiveness for glass ; Excellent weathering resistance,
resistance to ultraviolet radiation, ozone resistance, water
resistance; Outstanding High and low temperature resistant
performance , Still not brittle, hardening or cracking After curing
under the low temperature of 50 ℃, Will not become soft,
degradation, and always maintain good strength and elastic at + 150
℃ high temperature .
Use for structure's assembly of glass curtain wall. It can sealing
the glass and metal's surface to a single assembly components
directly. It can meet the requirement of fully-hidden or
semi-hidden frame curtain wall design; It's suitable for the
insulating glass structural's second layer's sealing. The site that
particularly high requirements on the sealing performance, and
Restriction of Usage:
Unsuitable used on the material's surface that leaking grease,
plasticizeror solvent. It should be used in the ventilatedplaces,
because the silicone sealant need to absorb the moisture in the air
for drying. Unsuitable used for frost or wet surface. Unsuitable
used for construction on the material's surface that the
temperature lower 6℃ or higher than 40℃. Unsuitable used for
construction on the unclean and uptight substrate's surface.
Unsuitable used for the interface of ground that bears the
structural strength or the ground damage by excessive physical.
Main Technology Data:
Vertical place, mm
Not change shape
Extrusion performance, s
Tack free time
The Tensile property(MPA)at 23℃ Tensile strength in adhesion(%)
Tensile strength in adhesion, Mpa
Tensile property(MPA)after flooding and UVA irradiation
bond damage area,%
Standard: GB16776 - 2005
Estimated amount of use: Please see following form of estimated
amount of various joints:
Note: The actual usage amount maybe different due to the joint
design, installation position of pad material, repairing skill and
wastage in application.
Attention: Information published in this instruction is correct.
However, but no means can it be considered and absolute guarantee,
as usage and application of the product in accordance with the
instruction given and success in application is beyond our control
and is depend on many factors. Customers should have a good
knowledge of product and make independent judgments of optimal
usage before application.